
Stilo ST6F Zero 8860 vs ST6F 8860 vs ST6F Carbon: Which One Should You Buy?
, by Supercar Store , 10 min reading time

, by Supercar Store , 10 min reading time

If you are comparing the Stilo ST6F Zero 8860, the ST6F 8860 and the ST6F Carbon, the short answer is this: all three are genuine Stilo full face car racing helmets built on the same ST6F shell shape, but they differ in homologation standard, carbon tensile grade, and weight. The ST6F Zero 8860 is the lightest and most protective, built for the highest level of competition. The ST6F 8860 sits in the middle, still FIA 8860-2018 certified but on a medium tensile carbon shell. The ST6F Carbon is the entry point into genuine Stilo carbon construction, certified to FIA 8859-2024 and Snell SA2025, and the most accessible on price.
All three are in ready stock with Supercar Store and can be ordered today for doorstep delivery to Dubai, the UAE, India and worldwide. If you are in the UAE and want one of these delivered to your door, order directly with us, or message us on WhatsApp +971 50 308 5760 and we will help you pick the right one for your racing.

The difference between these three Stilo ST6F helmets comes down to three things: the FIA homologation standard, the carbon tensile grade (which controls weight and cost), and the price point. All three share the same ST6F shell geometry, visor system and FHR post mounting, so fitment and comfort are identical across the range. What changes is how much protection and weight saving you are paying for.
| Model | Homologation | Material | Weight (Medium) | Price (AED) |
|---|---|---|---|---|
| ST6F Zero 8860 | FIA 8860-2018 | High tensile carbon | 1,420g | 22,800 |
| ST6F 8860 | FIA 8860-2018 | Medium tensile carbon | 1,530g | 13,500 |
| ST6F Carbon | FIA 8859-2024, Snell SA2025 | Normal tensile carbon | 1,380g | 9,200 |
FIA 8860-2018 is the top tier car racing helmet standard, built for the highest closing speeds and impact forces in categories like GT racing, prototypes and top level single seaters. Both the ST6F Zero 8860 and the ST6F 8860 are certified to this standard. FIA 8859-2024 with Snell SA2025 is the current generation standard for club racing, track day use and most national championships, and this is what the ST6F Carbon is certified to. Always check your own championship or circuit regulations before you buy, since some series mandate 8860 specifically.
Tensile grade describes the strength and stiffness of the carbon fibre weave used in the shell. A higher tensile carbon shell can be built thinner and lighter while still passing the same or a stricter impact standard, which is why the ST6F Zero 8860 uses a high tensile shell to stay light despite meeting the toughest FIA standard. The ST6F 8860 uses a medium tensile carbon shell, which is slightly heavier but still meets the same FIA 8860-2018 standard at a lower price. The ST6F Carbon uses a normal tensile carbon weave, which is where most of the price saving on this model comes from.
The ST6F Zero 8860 combines the highest FIA 8860-2018 homologation with the highest grade high tensile carbon shell, which is the most expensive combination to manufacture. You are paying for the lightest possible shell at the highest protection standard Stilo currently builds for car racing.
The Stilo ST6F Zero 8860 is the flagship of the ST6F range, homologated to FIA 8860-2018 and built on a high tensile carbon fibre shell. It is the lightest helmet in this comparison, starting from 1,240g in extra small and 1,420g in medium, which is a genuine advantage over a race weekend of long stints and high g-loads.
It is available in sizes XS 54, S 55, S 56, M 57, L 58, L 59, XL 61, 2XL 63 and 3XL 64, and comes factory fitted with FHR posts for HANS device compatibility. If this is the helmet you need for your championship's 8860 requirement, order it today and we will have it with you in Dubai, India or wherever you race, worldwide. Message us on WhatsApp if you want help confirming your size before you order.
The Stilo ST6F 8860 carries the same FIA 8860-2018 homologation as the Zero 8860, built instead on a medium tensile carbon shell. It weighs from 1,410g in small up to 1,570g in large, a little more than the Zero 8860 but at close to half the price, which makes it the practical choice if you need the 8860 standard without stretching for the top tier shell.
Sizes run XS 54, S 55, M 57, L 58, L 59, XL 61, 2XL 63 and 3XL 64, with FHR posts included as standard. If your series requires FIA 8860-2018 and you want to keep budget for the rest of your setup, order directly with us and we deliver across the UAE to your door, with worldwide shipping available to India and beyond.
The Stilo ST6F Carbon is homologated to FIA 8859-2024 and Snell SA2025, the current standard for club racing and most national championships, and it is actually the lightest helmet of the three by shell weight alone, from 1,230g in small to 1,470g in large, since it does not carry the heavier reinforcement needed for 8860 certification.
It is available in sizes XS 54, S 55, M 57, L 58, L 59, XL 61, 2XL 63 and 3XL 64, with factory fitted FHR posts. This is genuine Stilo carbon construction at the most accessible price point in the range, and a strong choice if your event does not mandate FIA 8860. If you are in the UAE and want this one delivered to your doorstep, order now or WhatsApp us to confirm fit and availability.
Measure around your head about 2.5cm above your eyebrows, keeping the tape level all the way round, and match that measurement in centimetres to the size chart below. Sizes on the ST6F range run from XS (54cm) up to 3XL (64cm), and Stilo shells are grouped into small shell sizes (XS to L) and large shell sizes (L+ to XXXL), so always check which shell group your size falls into rather than the label alone.

Watch the video above for a step by step walkthrough on measuring your head correctly before you order. If you are still unsure which size to pick between the ST6F Zero 8860, ST6F 8860 or ST6F Carbon, message us on WhatsApp with your head measurement and we will confirm the right size for you.
We keep a a bit stock of Stilo helmets in our UAE warehouse. If a specific size is not in ready stock, we can import and deliver it to you in 3-4 weeks. We have been in business for twelve years, delivering worldwide and especially across the UAE to drivers and owners, so trust is never an issue. If you are looking for a specific size or want to check current stock on any of these three helmets, just drop us a message on WhatsApp so we can confirm availability. If it is in ready stock, we ship within 24 hours.
All prices we quote, including the AED 22,800, AED 13,500 and AED 9,200 above, are doorstep delivery prices. We always quote the doorstep delivery price so there is no stress, no confusion, and no complex or hidden charges. There are no extra charges, no custom duty, and nothing else for the customer to pay. Every order is delivered directly to your address at the price quoted.
We mainly deliver across the UAE, where most of our customers are, but we also ship worldwide to almost any country, including India. If you are outside the UAE, we can still deliver to you. Just drop us a message on WhatsApp and we will give you the doorstep delivery price with shipping and taxes all included.
Is the ST6F Zero 8860 worth the extra cost over the ST6F 8860?
If outright weight saving and the highest grade carbon shell matter for your racing, yes. Both carry the same FIA 8860-2018 homologation, so the difference is shell weight and tensile grade, not safety standard.
Can I use the ST6F Carbon if my championship requires FIA 8860?
No. The ST6F Carbon is certified to FIA 8859-2024 and Snell SA2025, not FIA 8860-2018. If your event mandates 8860, you need the ST6F 8860 or the ST6F Zero 8860.
Do all three helmets fit HANS devices?
Yes. All three come factory fitted with FHR posts for HANS device compatibility.
How do I know my correct size?
Measure around your head about 2.5cm above your eyebrows and match it to the sizing chart above, or watch our measuring video and message us on WhatsApp with your measurement.
Are these genuine Stilo helmets?
Yes. All three are genuine Stilo ST6F helmets, sourced and sold as authentic product, not replicas.
Do you ship to Dubai and India?
Yes. We deliver doorstep to Dubai and the UAE, to India, and worldwide.
Supercar Store stocks, fits and supports genuine Stilo ST6F racing helmets locally in the UAE. Order any of the three models on the site or WhatsApp us at +971 50 308 5760 and we will help you choose between the ST6F Zero 8860, ST6F 8860 and ST6F Carbon. We ship to Dubai, India and worldwide.